Advantages Of Using Self-Locking Nuts And Bolts

 

Nuts make sure that the screw is not getting loose. Sometimes under heavy loads, it might loosen up automatically which results in failure of the connection. This loosening up can be caused by external factors like, weather or corrosion. Though, a proper bolt locking should be holding a bolted connection even under heavy impact or vibrations and under dynamic loading.

Self-locking nuts and bolts’ special shape avoids failures and also allows reusing the nut. As there are no securing elements required, the number of components are also reduced in the self-locking feature of the nut. It is not required to process the screw as the screw lock acts against the unintentional release. 

A few examples of these bolts are- 

1. Banjo bolts- Banjo bolts are machines that use magnets in order to attach steel tubes together. 

These bolts are used in the automobile industries, oil and pipeline industries and are also used for building bridges, buildings, etc. 

2. Stud bolts- Stud bolts are considered to be some sort of specialised connectors mostly because it is used to close flanges and metal parts. Flange connections are made with a special screw which is called the stud bolt. 

It has a threaded rod which is fastened with a hexagon nut on both the sides. 

It is usually used in the gas and oil industry. It is widely used in the petrochemical industry. Other industries where stud bolt is used are, mining and construction industries. It is a basic component in the cement, sewage, water, and automobile industry.

There are multiple advantages of using these nuts and bolts, a few are-

• There is no error that is likely to occur and can be easily installed 
• There is a uniform distribution of tension forces among all the threads
• There is no tension of tearing of the threads
• These nuts and bolts are really pocket-friendly because there are no additional parts that are required
• These can be reused without the risk of degradation

There are a few advantages without undercutting like-

• There is no damage to the surface on the work piece or the counter material
• These are corrosion resistant hence are not affected 

They are used in multiple industries like- 

• Shipbuilding industry 
• Rail and traffic industry
• Energy industry
• Construction and forestry machines

These nuts and bolts are easily available on our website which is for screws, nuts, bolts, etc. called Universal Precision Screws (UPS). We have a wide range of good quality products available on our website. We always work to serve our consumers better. Do check our products out!